Sort by:

Refine Your Search

  • Budget

    • £
    • £



VISION Techconnect 2x25w Amp Module - TC3-AMP
TC3-AMP 50w Digital Amplifier Extremely small 2 x 25 w (RMS) at 8 ohms Digital Amp 2 x Stereo inputs (Input 1 duplicated on front and rear) IR Remote control included By using latest low-impedance digital amplifier chip technology the new Techconnect Amp module outputs a massive 2 x 25 watts RMS (at 8 ohms) but fits into the space of a Techconnect module. Front Panel Input Two Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This “half-normalled” input disconnects the rear terminal while in use. D-Class Amplifier Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary Power Four Speakers Don’t let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers). Preset Memory By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on - for example in hotel guest rooms. Tactile Dial A simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input. Remote Control A remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision’s spare remote controls have tone buttons but they do not work with this product. Easy to Install and Uninstall A robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required. Cables Included Speaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect. Secure Ideal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft. Close at Hand Can be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms. Integrated Techconnect Family Included is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules. Specifications AMPLIFIER MODULE DIMENSIONS: 42 x 64 x 36mm / 1.65 x 2.8 x 1.57 BACKBOX DIMENSIONS: 86 x 86 x 45mm / 3.39 x 3.39 x 1.77 SURROUND DIMENSIONS: 86 x 86 x 8mm / 3.39 x 3.39 x 0.31 CARTON DIMENSIONS: 240 x 205 x 63mm / 9.45 x 8.07 x 2.48 AMPLIFIER WEIGHT: 63 grams / 0.14 lb PACKAGED WEIGHT: 1.1kg / 2.4 lb COLOUR: White INPUTS: 2 x Stereo inputs via removable phoenix connectors TECHNICAL DETAILS: 2 x 25w @ 8 ohms Total Harmonic...
1 | Delivered: Next Working Day

Compare Prices | AV Partsmaster
£ 126.00
(Delivery cost : 10.79 )
Total price: £ 136.79



Vision AV-1900 2 x 50w Mixer Amplifier
The AV-1900 is a highly capable mixer-amplifier packed with useful features to make it as easy as possible to operate. It is designed for use in demanding applications like meeting spaces, small auditoriums, lecture theatres, school halls, and small churches. It has professional audio features normally only found in much more expensive mixer amps. Bluetooth For ease of connectivity it has a Bluetooth input. The device name and pin are fixed and cannot be changed. It can only pair with one device at a time. A device can be manually unpaired by pressing the INPUT 3 dial. If you do not want Bluetooth active just set input 3 to mic input with the switch on the rear. Mixer Amp This amp has four inputs, each of which can either be used for a microphone or a line-level input. It is a true mixer amp, so it can bring together multiple sources and play them at the same time. Mic Pre-Amp Trim The input gain for each mic input can be "trimmed" - adjusted on the rear panel. This allows the installer to "turn up" less sensitive mics, and "turn down" hot inputs. Switchable Phantom Power Each mic input has Phantom power which is a voltage required to make professional condenser mics work. Phantom can be turned off on each input discretely. Four Microphone Inputs All mic inputs are “balanced” to eliminate electro-magnetic noise induced on long cables. Input 1 uses a professional XLR connector - more convenient for rental and portable use, and the other inputs use phoenix connectors - more suited to permanent installations. RS-232 Designed for integration with a bigger system, it can be controlled by a control system such as Techconnect Control via RS-232. D-Class An efficient Digital-class amplifier chip dramatically reduces power consumption especially at rest, and makes this amp super-small. 3 x Stereo Inputs Three line-level stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. Inputs 1 and 2 use 2-phono (RCA) connectors. Input 4 is via a Minijack connector, and is duplicated on the front panel for adhoc access. Line Output A line-level pre-output on the rear bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post-mix; volume adjustments made on the front panel affects the output level. Auto-Standby If the amplifier senses no input it will automatically go into standby mode. When it senses input it will reactivate. Auto-standby can be disabled via RS-232. Mounting Options Rack ears are included so it can be integrated into an AV rack. 8 or 4 Ohms The powerful amp can drive a 8 ohm load (two loudspeakers), or 4 ohm load (four loudspeakers).
1 | Delivered: Next Working Day

Compare Prices | AV Partsmaster
£ 246.00
(Delivery cost : 10.79 )
Total price: £ 256.79


ConXeasy SB603 Flat Panel Display Soundbar - Black
CONXEASY SB603 FLAT PANEL DISPLAY SOUNDBAR Soundbar with Bluetooth connectivity The SB603 has been designed to give you the high definition audio you need to accompany your HD picture with the inclusion of 2 HDMI inputs. Using analogue, optical, HDMI and Bluetooth inputs, the SB603 will connect easily to any panel or audio sources - even wirelessly from your laptop, mobile or tablet. With no need for a separate subwoofer the SB603 has two built-in Ultra-Bass passive drivers, 2 bass drivers and 2 full range drivers, allowing full frequency range audio in a single discrete unit. Designed to perform in any room large or small, the SB603 will bring new life to your panel. Available in black or white. POWERFUL 60W OUTPUT Loud, clear sound in a variety of sized rooms BLUETOOTH APTX Brings added convenience by providing lossless, high quality streaming audio from smartphones, laptops and tablets. AMAZING CONNECTIVITY With 2 HDMI inputs and 1 HDMI output (ARC) along with TOSLINK optical input and analogue input, the SB603 offer great connectivity. CHOICE OF COLOURS Available in both black and white to fit with the install in the room TECHNICAL SPECIFICATION Attribute Value Wide frequency response 70Hz - 15K Hz Width 900mm Depth 85mm Height 88mm Power output 60W WARRANTY INFORMATION: The following warranties apply to this product Warranty Name Term* 3 years warranty 3yrs *Total warranty period includes onsite and/or return to base cover.
1 | Delivered: Next Working Day

Compare Prices | AV Partsmaster
£ 150.00
(Delivery cost : 10.79 )
Total price: £ 160.79






Contact Us | Terms of Use | Privacy Policy | Add to Favorites

Copyright © 2021 MyDealHero.co.uk